| Dimensions | L6300*1430*1530 |
|---|---|
| Heating Tunnel | 3890mm |
| Component Type | Single/double Sided Board Such As CSP, BGA, Etc. |
| Zones Constitute | Upper8,bottom8,2 Cooling Zones |
| Temperature Controlling | PID Close-loop Control, SSR Drive |
| Heating Zones | 5 Top, 5 Bottom |
|---|---|
| Oven Length | 79" (200cm) |
| Heated Length | 132 Cm |
| Accuracy Of Temperature Controller | ± .1°C |
| Temperature Range | 60-350°C |
| Dimensions | L5520*1430*1530 Mm |
|---|---|
| Zones Constitute | Upper8,bottom8,2 Cooling Zones |
| Heating Method | Fully Forced Air Convection |
| Temperature Controlling | PID Close-loop Control, SSR Drive |
| Temperature Range | Ambient---300℃ |
| Heating Zones | 4 Zones |
|---|---|
| Rising Time | 15 Mins |
| Controlling Type | Touch Screen And PLC |
| Temperature Controlling | PID Close-loop Control, SSR Drive |
| Temperature Accurancy | ±1 ℃ |
| Cleaning Process | Chemical Cleaning Section, Pure Water Rinsing Section And Strong Hot Air Drying Section |
|---|---|
| Chemical Cleaning Modules | Chemical Pre-cleaning Or Isolation Section, Chemical Cycle Cleaning, Wind Cutting Isolating |
| Mesh Belt Material | SUS316 |
| Size | L5860mm*W1650mm*H1650mm |
| Controlling Mode | Touch Screen + PLC |
| Dimensions | L3750*1360*1550 |
|---|---|
| Controlling Type | PC + PLC Controlling |
| Temperature Range | Ambient---300℃ |
| Max PCB Width | 300mm |
| Conveyor Speed | 0-1800mm/min |
| Power Supply Requirements | 3PH, 380 VAC, 5 Wires |
|---|---|
| Mesh Belt Material | SUS316 |
| Size | L5860mm*W1650mm*H1650mm |
| Product Category | SMT Cleaning Machine |
| Final Wind Cutting Isolating And Drying | Final Wind Cutting Isolating(cold Air Drying), Hot Air Drying, Cold Air Drying |
| PCB Loading Time | Approx 6 Seconds |
|---|---|
| Magazine Change-over Time | Approx 30 Seconds |
| Transport Height | 900±20mm(or Customized) |
| Power Supply | 100-230V AC(customized) Single Phase, MAX 300V/A |
| PCB Size (L×W)～(L×W)mm | (50x50)～(350x250)mm |
| PCB Thickness | Min0.6mm |
|---|---|
| Magazine Number | Transport Up:1pcs,transport Down:1ps,(or Customized) |
| Step Pitches Select | 1-4(10mm Step Pitches) |
| PCB Loading Time | Approx 6 Seconds |
| Magazine Change-over Time | Approx 30 Seconds |
| PCB Thickness | Min0.6mm |
|---|---|
| PCB Loading Time | Approx 6 Seconds |
| Transport Direction | Left To Right/right To Left(optional) |
| Transport Height | 900±20mm(or Customized) |
| Air Pressure | 4-6 Bar, MAX30L/minute |
