| Camera | CCD Color Camera Resolution |
|---|---|
| Light Source | RGB LED Light Source Annular Structure |
| PCB Size | 450mm X 350 Mm |
| Minimum Parts | 0201chip & 0.3mmpitch |
| Movement Speed | 830 Mm/SEC (MAX) |
| Heating Zones | 4 Zones |
|---|---|
| Heating Tunnel | 980mm |
| Dimension | L1920*W750*H1250 |
| Rising Time | 15 Mins |
| Controlling Type | Touch Screen And PLC |
| Printing Table Sizes | 300x1500 Mm |
|---|---|
| The Frame Size | 370×470mm,420×520mm,550×650mm |
| Printing Position Fixed | PCB Outer Or Pin Positioning |
| Bedplate Fine-tuning | Front/Back±10mm R/L±10mm |
| Printing Precision | ±0.02mm |
| Power Supply Requirements | 3PH, 380 VAC, 5 Wires |
|---|---|
| Mesh Belt Material | SUS316 |
| Size | L5860mm*W1650mm*H1650mm |
| Product Category | SMT Cleaning Machine |
| Final Wind Cutting Isolating And Drying | Final Wind Cutting Isolating(cold Air Drying), Hot Air Drying, Cold Air Drying |
| PCB Loading Time | Approx 6 Seconds |
|---|---|
| Magazine Change-over Time | Approx 30 Seconds |
| Transport Height | 900±20mm(or Customized) |
| Power Supply | 100-230V AC(customized) Single Phase, MAX 300V/A |
| PCB Size (L×W)~(L×W)mm | (50x50)~(350x250)mm |
| PCB Thickness | Min0.6mm |
|---|---|
| Magazine Number | Transport Up:1pcs,transport Down:1ps,(or Customized) |
| Step Pitches Select | 1-4(10mm Step Pitches) |
| PCB Loading Time | Approx 6 Seconds |
| Magazine Change-over Time | Approx 30 Seconds |
| Magazine Number | Transport Up:1pcs,transport Down:1ps,(or Customized) |
|---|---|
| Step Pitches Select | 1-4(10mm Step Pitches) |
| Transport Height | 900±20mm(or Customized) |
| Power Supply | 100-230V AC(customized) Single Phase, MAX 300V/A |
| PCB Size (L×W)~(L×W)mm | (50x50)~(350x250)mm |
| Dimensions | L4900*1270*1450mm |
|---|---|
| Zones Constitute | 8 Zones |
| Temperature Controlling | PID Close-loop Control, SSR Drive |
| Temperature Range | Ambient---300℃ |
| Temperature Accurancy | ±1 ℃ |
| Camera | CCD Colorful Camera |
|---|---|
| Width Adjustment | Automatically |
| PCB Size | 20 Mm × 20 Mm To 360 Mm X 400 Mm |
| Minimum Parts | 01005 Chip |
| Accurate Location | <8 μm |
| Cleaning Process | Chemical Cleaning Section, Pure Water Rinsing Section And Strong Hot Air Drying Section |
|---|---|
| Chemical Cleaning Modules | Chemical Pre-cleaning Or Isolation Section, Chemical Cycle Cleaning, Wind Cutting Isolating |
| Mesh Belt Material | SUS316 |
| Size | L5860mm*W1650mm*H1650mm |
| Controlling Mode | Touch Screen + PLC |